Modular Early Production Facility

• Appraisal well facility – inlet manifold, separator, storage and flare modules for early oil and reservoir data from appraisal wells.
• Full field facility – the complete module set, from inlet manifold to export pumps and control room, producing ahead of the permanent plant.
• Marginal and remote field facility – modules matched to fields where a permanent plant is not justified.
• Phased build-up – modules added as more wells come on line.
• Relocatable facility – modules moved to the next field when the permanent plant takes over.

• Capacity: sized to the field's oil, gas and water production, or to client specification
• Module selection: from the modules listed above, to suit the field, or to client specification
• Oil treatment: three-phase separator and heater-treater sized to the crude properties, or to client specification
• Gas handling: gas handling and flare sized to the gas rate, or to client specification
• Produced water: treated to the client's injection or disposal limit
• Control: control room with PLC and SCADA, or to client specification

Operators use the facility to bring greenfield developments into production while the permanent plant is engineered and built, and to put appraisal wells on production for early revenue and reservoir data. For marginal and remote fields, a modular plant can be the long-term solution, and modules can be moved to the next field when production declines.

• Fast first oil – factory-built modules shorten the time from well completion to production.
• Relocatable modules – skids can be moved and reused on the next field.
• Built and tested in the factory – each module is FAT-tested before shipment, reducing site work.
• One supplier for the process train – separation, water treatment, chemical injection and control from one manufacturer.
• Integrated control – PLC and SCADA engineered in-house for the complete facility.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product: separator, produced-water, chemical injection and control modules from one manufacturer, built and tested in the factory for fast first oil.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Test Separator Package – well testing and allocation metering alongside the facility.
• Produced Water Treatment Package – the water treatment module of the facility.
• Chemical Injection Skid – dosing of demulsifier, corrosion inhibitor and other production chemicals.
• E-House and Power Skid – prefabricated control room and power module.