Containerised Lube Shelter (20 ft / 40 ft)

• 20 ft shelter – for smaller workshops and sites with fewer lubricant grades or limited space.
• 40 ft shelter – up to 12 oil lines plus grease guns in one unit, for a full plant maintenance department.
• Multiple-shelter installation – two or more shelters for large complexes with many lubricants, as supplied to a petrochemical complex in Saudi Arabia.
• Oil and grease layout – piped oil lines combined with a dedicated rack of colour-coded grease guns.
• Single-phase or three-phase supply – 380 V three-phase or 220 V single-phase, 50/60 Hz, to suit the site.
• Hot-climate build – IP65 panel designed for 50 °C ambient, with exhaust fan and LED lighting for desert sites.

• Ready to use on arrival – built, piped, wired and factory-tested in Chennai, so site work is limited to the plinth, power connection and commissioning.
• Grades never mix – each oil has its own pump, 10 µm filter and pipeline, with no common tank.
• Water and dust kept out – drums are stored under desiccant breathers on spill pallets inside a closed container.
• Traceable consumption – an oval-gear meter, colour-coded spigot and nameplate on every oil, so each litre dispensed is recorded.
• Contained spills – sump pallets with drain valves, and a spill tray and drain sink under the dispensing panel.
• Safer workplace – E-stop at each pump, IP65 panel, LED lighting, exhaust fan, anti-slip floor and self-closing doors.
• Relocatable – a standard ISO container that can be moved if the site layout or the workshop location changes.

Container: 20 ft or 40 ft ISO | Oil lines: up to 12 per 40 ft unit, plus grease guns | Oils: 50–500 cSt, 2–3 GPM per line at 5–12 bar | Power: 380 V 3-ph or 220 V 1-ph, 50/60 Hz | Panel: IP65, designed for 50 °C ambient | Foundation: level 150 mm plinth rated for 9 t

GA and cross-section drawings with BoM, P&ID and circuit diagrams, load schedule, installation, operation and maintenance manuals, QC dossier, FAT report, SAT procedure and certificate, spares list with interchangeability matrix, and warranty certificate.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: a complete, factory-tested lubrication station shipped as one ISO container, with commissioning, operator training and spares.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.