The Tech Inc. Bioreactor Gas Panel and Exhaust Condenser supplies air, oxygen, nitrogen and carbon dioxide to a bioreactor or fermenter at controlled flows, and cools and filters the exhaust gas leaving the vessel. Bioreactor makers fit it as a standard sub-assembly, and plants buy it when they upgrade older vessels.

Main components

Up to four gas lines, each with filter, regulator, isolation valve and mass flow controller
Separate sparger and headspace overlay outlets
Sterile inlet filters and check valves on each outlet
Exhaust condenser with cooling jacket and condensate return
Exhaust filter housing, with an optional heater to keep the filter dry
Stainless steel panel or enclosure with signal terminals for the bioreactor controller

Applications: cell culture and microbial bioreactors, fermenters, vaccine and biologics plants, and research and pilot fermentation.

Send your process data and specification to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.

Bioreactor Gas Panel and Exhaust Condenser

Two-gas panel – air and oxygen for microbial fermentation.

Four-gas panel – air, oxygen, nitrogen and carbon dioxide for cell culture.

Panel with exhaust set – gas panel, exhaust condenser and exhaust filter as one package.

Retrofit panel – built to replace the gas train on an existing vessel.
Gases: air, O₂, N₂ and CO₂, or to client specification

Flow control: thermal mass flow controllers ranged to the vessel size

Wetted materials: SS316L tubing and fittings

Exhaust condenser: SS316L shell-and-tube or jacketed design, cooled by chilled water

Control: analogue or digital signals to the bioreactor controller
Precise gassing – mass flow control on every gas line.

Dry exhaust filters – condenser and heater keep the exhaust filter from blinding.

Ready to fit – built to the bioreactor maker's connections and signals.

Gas know-how – built by the team that makes our gas panels and pressure-reducing stations.
Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.

Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.

Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).

Trusted by Saudi Aramco – an established supplier to Saudi Aramco.

Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.

Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).

For this product – we build gas panels every day, so the panel arrives tested and documented, ready for the bioreactor maker or plant to fit.
Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.
Bioreactor Gas Panels and Exhaust Condensers: The Lungs of Every Fermenter
Gas Panels and Stream Switching – gas panels and stream switching.

Hydrogen and Industrial Gas Pressure Reducing Station – gas pressure-reducing stations.

Nitrogen Generator Skid (Membrane / PSA) – nitrogen supply on site.